USD ($)
$
United States Dollar
Euro Member Countries
¥
China Yuan Renminbi
$
Australia Dollar
R$
Brazil Real
лв
Bulgaria Lev
$
Canada Dollar
$
Chile Peso
$
Colombia Peso
Czech Republic Koruna
£
Egyptian Pound
Ft
Hungary Forint
India Rupee
Rp
Indonesia Rupiah
Israel Shekel
¥
Japan Yen
Kazakhstani Tenge
kr
Denmark Krone
$
Hong Kong Dollar
£
United Kingdom Pound
Korea (South) Won
$
New Zealand Dollar
Russia Ruble
Viet Nam Dong
د.إ
United Arab Emirates dirham
CHF
Switzerland Franc
kr
Sweden Krona
kr
Norway Krone
$
Singapore Dollar
R
South Africa Rand
$
Mexican Peso
Turkey Lira

Steel String Guitar Setup

Lesson 10/34 | Study Time: 5 Min
Steel String Guitar Setup

Steel String Guitar Setup

Steel Strings

There are many types of steel strings available. Steel strings come in a variety of gauges, different types of winding and can also be manufactured from different types of metal.

Steel string gauges vary from extra light to heavy. If you are learning on a steel string guitar then a light gauge or an extra light gauge is recommended. Almost all steel string guitars have two unwound strings (strings 1 and 2) and four wound strings (strings 3 - 6). The wound strings contain an inner core and an outer core. The main two types of wound strings are roundwound and flatwound. The roundwound strings are the most popular, made up of a round wire coiled around an inner steel core producing a definite coiled string. This type of string gives a strong, rich and loud sound. Flatwound strings use a strip winding to give a smooth feel to the string. This type of string produces a softer more mellow sound and as this type of string is easier on the fingers can be recommended for beginning guitarists. The most common material used for the wound steel strings is Bronze though Nickel, Brass and even Stainless Steel strings are available.

Once again, a reputable music store will be able to assist with providing you with the correct strings for your steel string guitar.

Fitting Steel Strings

Fixing the string to the bridge: All steel strings have a steel ball tied to the end of the string. The ball is poked into a hole in the bridge and held into place with a bridge pin. The bridge pin has a slot cut into it to accommodate the string. Study the following diagrams.

Option 2.

Step 1.

Step 2.

Step 3.

Tying the string to the tuning key: When fitting a string to the tuning key the string is inserted through the tuning key hole only once.

The string is then neatly coiled 4 - 5 times around the barrel of the tuning key from the top of the barrel near the hole to the base of the barrel. See below.

 

It is essential that the strings are wound onto the barrel of the tuning key from the correct side. Turn the tuning key so the string is wound inward towards the the centre of the head not towards the outside of the head. Study the diagram.

GDPR

When you visit any of our websites, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to. The information does not usually directly identify you, but it can give you a more personalized web experience. Because we respect your right to privacy, you can choose not to allow some types of cookies. Click on the different category headings to find out more and manage your preferences. Please note, that blocking some types of cookies may impact your experience of the site and the services we are able to offer.